TUBULAR HEATER FOR MANIFOLDS AND HOT PLATES / BLOCKS
Tubular Heaters are generally Formed to specified sizes in Hot Runner Manifolds and Hot Plates. these heaters are mainly used for Hot Runner manifolds and Hot Plates .We offer Tubular Heaters for superior performance and life expectancy to withstand high sheath temperature and provide the best combination of physical strength, high emissivity & good thermal conductivity to heat hot runner manifolds and Hot Plates.For manufacturing manifold tubular heaters it is necessary to provide an accurate dimensional sketch showing all centre distances, bending radius and path.Formed Tubular Heaters is supplied in Chrome Nickel Steel with nominal sheath diameter of 6 mm, 6.5 mm and 8.00mm Standard elements have a threaded terminal post which gives a cold section of approx 40mm minimum.For manufacturing manifold tubular heaters it is necessary to provide an accurate dimensional sketch showing all centre distances, bending radius and path.
How To Order
Please send a detailed dimensional drawing file showing all center distances along with
• Total path length
• Wattage
• Voltage
• Required quantity
TUBULAR HEATERS: FOR MANIFOLDS AND HOT PLATES – APPLICATIONS
TUBULAR HEATERS: FOR MANIFOLDS AND HOT PLATES – TECHNICAL DATA
| Length | 300 -1550mm | 400 – 2100mm |
| Maximum Current | 12 A | 15 A |
| Nominal Voltage | < 230V | < 400V |
| Wattage | ±10% | ±10% |
| Dielectric Strength | 1.5 HV | 1.5 HV |
| Insulation MΩ | >5Ω | >5Ω |
| Leakage Current | < 0.5 mA | < 0.5 mA |
| Minimum Unheated | 40mm | 45mm |
| Terminal Pins | M3 x .50mm/ Plain | M4 x .70mm |
LENGTH TOLERANCES – ± 2 %
DIAMETER TOLERENCE – ± 0.10 mm