PRESSURE TRANSMITTERS – STAINLESS STEEL PRESSURE TRANSMITTERS
- 1/2% accuracy
- stainless wetted parts
- two wire 4…20mA
The Stainless Steel Pressure transmitter features compact construction, an integral amplifier, 2-wire 4-20mA output signal and extensive medium compatablility.The design of the Stainless Steel Pressure Transmitter provides a 1/2% accurate, low cost transmitter that can operate over a wide temperature range with corrosion resistance.The Stainless Steel Pressure Transmitter is available from stock in both standard and refrigerant models.
PRESSURE CONTROLLER
FEATURES
Easy to configure
Two different configuration levels provide easy access to parameters. A 4-digit security code prevents unauthorized changes. Parameters can also be hidden to the user to prevent mis-configuration of the unit.
Various Control algorithms
These series of controllers provide several different algorithms:⦁ PID or ON/OFF control.⦁ Heat/Cool algorithms with 2 different PID sets.
Dual display and Bargraph
Two large 4 digits displays and one 10 LED bargraph display PV, SP and configuration parameters. Up to 8 LEDs display the status of the different Outputs (Control, Alarm, …) and also provides indication of the Auto/Manual and Programmer states.
Setpoint Programming< strong>Extended Alarm capability
Three different alarm outputs are available per instrument, 17 alarm modes are configurable.
Autotuning capability
RS232 or RS485 ASCII protocol is optionally available. Up to 30 Controllers can be connected to a single host computer. The host computer can change the SP, monitor the PV, the output or change the configuration of the unit.
Remote Setpoint capability.
Manual / Automatic modes.
Universal Power supply
Operates on any voltage from 85Vac to 265Vac at 50/60Hz.
Large operating range
These instruments can operate from –20°C to +65°C (-4°F~149°F)