FEATURES

  • Used latest micro controller based technology for better accuracy
  • 8 Channel fixed input for all thermocouple, J, K, R, S, T, E, B, N programmable by user & RTD (PT-100), 4-20mA, 0-10 VDC factory settable
  • Easy on-line field calibration by front panel membrane keypad
  • Field programmable channel scan time 1 to 59 sec.,
  • Logging interval 1 to 9999sec & Printing Interval 5 to 9999 sec.
  • Field programmable Delay time 1 to 99 sec. for Relay Output
  • Optional RS-232 / RS-485 Modbus Serial Port
  • Optional Parallel / USB Printing Port

APPLICATIONS

  • ISO Certification records, Validation process certifying
  • Pharmaceutical process validation with graph & excel report in    Autoclaves
  • Online profile recording for Oven & BOD, Incubator, Humidity    Chamber
  • Winding temperature of generators, Bearings, motors,    transformers
  • To know heat Profile in furnace, foundries for Heat treatment    application
  • Primary & auxiliary temperature scanning of boiler
  • Chemical & Hazardous area where data monitoring is essential
  • Room Mapping in Pharmaceutical

Technical Specifications

Input
Display L.E.D. IndicationSet Point Control actionRelay Output SettingScan Time Print IntervalLogging IntervalMemoryMonitoring SensorOpen / Under / OverSupply VoltageOperating TemperatureEnclosure DetailsProtection ClassCabinet MaterialCable EntryDimensionCutoutMountingWeightOptional 4 digits of 13 mm height Red L.E.D display for ‘Process Value’ indication
 1 digit of 13 mm height Red L.E.D display for ‘Channel Number’ indication
 8 Nos Red L.E.Ds of 3 mm for Alarm Indications i.e. AL1 & AL 2
 2 independent set points for each channel with 2 common relay outputs &
 programmable latch / non-latch facility for 2 common relays & Alarm indications
 HI – LO, LO – Very LO, HI-Very HI Control action logic; programmable by user
 1 NO/C/NC Relay Contact Rated 230VAC/5A for Relay-1 (AL1) & Relay-2 (Al2)
 Setting by 5 feather touch keypad on front panel ‘MODE’, ‘SHIFT’, ‘INC’, ‘ENT’, ‘PRN / ACK’
 1 to 59 sec scan/scroll time between each channel; programmable by user
 (Optional) 5 to 9999 Sec for Direct print out on 24 / 80 / 132 Column Dot matrix Printer
 1 to 9999 Sec log interval for data logger model; programmable by user
 Max. 5000 readings storing capacity for all 8 channel in Data Logger model
 Memory saturation, Memory Scrolling (FIFO) & Online PC interface available in Data Logger model
 Temperature sensor ‘Break / Open’ display shows ‘oPEn’ indication
 Under range ‘undr’. Over range ‘OuEr’ indication for RTD & all Thermocouple I/Ps
 230 VAC ±10%, OR 110 VAC ±10% OR 24 VDC OR 12 VDC
 – 40 To 85 oC Relative Humidity : Below 95% non condensing

 PANEL MOUNTING (PM)  
                                
 IP – 40                                          
 ABS Plastic, White Colour           

Terminal connector                      
 
96 (H) X 96 (W) X 170 (D) in mm  92 (H) X 92 (W) in mm
                  
Panel mounting                             Approx. 1.0 Kg  
                          
a) Isolated RS-232 / RS-485 Serial Port with MODBUS RTU Protocol output.
 b) Isolated Parallel port for direct printout on 24/80/132 column Dot Matrix printer without need of Computer (PC)
 c) SMARTLOG / DATALOG / SCADA Data Acquisition Softwares for online graphs & history data reports
 d) Individual Relay output or Grouping Relay output can be given for each channel

FEATURES

  • Used latest micro controller based technology for better accuracy
  • 16 Channel fixed input for all thermocouple, J, K, R, S, T, E, B, N programmable by users, and Fixed Inputs for RTD (PT-100/CU53), 4-20mA, 0 – 10 VDC factory settable
  • Easy on-line field calibration by front panel membrane keypad
  • Field programmable channel scan time 1 to 59 sec., Logging interval 1 to 9999 sec & Printing Interval 5 to 9999 sec.
  • Field programmable Delay time 1 to 99 sec. for Relay Output
  • Optional RS-232 / RS-485 Modbus Serial Port Optional Parallel / USB Printing Port
  • Opt

APPLICATIONS

  • ISO Certification records, Validation process certifying
  • Pharmaceutical process validation with graph & excel report in  Autoclaves
  • Online profile recording for Oven & BOD, Incubator, Humidity     Chamber
  • Winding temperature of generators, Bearings, motors, transformers
  • To know heat Profile in furnace, foundries for Heat treatment     application
  • Primary & auxiliary temperature scanning of boiler
  • Chemical & Hazardous area where data monitoring is essential
  • Room Mapping in Pharmaceutical

Technical Specifications

Input
Display  L.E.D. Indication Set Point  Control action  Relay Output  Setting  Scan Time  Print Interval  Logging Interval  Memory Monitoring Sensor  Open / Under / Over  Supply Voltage  Operating Temperature Enclosure Details Protection Class Cabinet Material Cable Entry Dimension Cutout Mounting Weight Optional 5 digits of 13 mm Height Red L.E.D display for ‘Process Value’ indication 
2 digit of 13 mm Height Red L.E.D display for ‘Channel Number’ indication 
32 Nos Red L.E.Ds of 3 mm for Alarm Indications Al1 & AL 2 Individual for each channel 
2 independent set points for each channel with 4 common relay outputs & programmable latch / non-latch facility for 4 common relays & Alarm indications 
HI – LO, LO – Very LO, HI-Very HI; programmable by user  
1 NO/C/NC Relay Contact Rated 230VAC/5A for four Relay 
Setting by 8 keys on front panel ‘MODE’, ‘SHIFT’, ‘INC’, ‘ENT’, ‘PRN’, ‘ACK’, ‘ESC’, ‘HOLD’ 
1 to 59 sec scan/scroll time between each channel; programmable by user 
(Optional) 5 to 9999 Sec for Direct print out on 24 / 80 / 132 Column Dot matrix Printer 
1 to 9999 Sec loggin interval in data logger model; programmable by user 
Max. 3000 readings storing capacity for all 16 channel in Data Logger model 
Memory saturation, Memory Scrolling (FIFO) & Online PC Interface available in Data Logger model 
Temperature sensor ‘Break / Open’ display shows ‘oPEn’ indication 
Under range ‘undr’. Over range ‘OuEr’ indication for RTD & all Thermocouple
I/Ps 230 VAC ±10%, OR 110 VAC ±10% OR 24 VDC OR 12 VDC -40 To 85 oC Relative Humidity : Below 95% non condensing 
PANEL MOUNTING (PM)   
IP – 40 
                                      
MS, Aluminium powder coated  
Terminal connector     

192(H) X 96(W) X 200(D) in mm    

Panel mounting 1.5 Kg   Isolated RS-232 / RS-485 Serial Port with MODBUS RTU Protocol output 
b) Isolated Parallel port for direct printout on 24/80/132 column Dot Matrix printer without need of Computer (PC) 
c) SMARTLOG / DATALOG / SCADA Data Acquisition Softwares for online graphs & history data reports 
d) Individual Relay output or Grouping Relay output can be given for each channel